Intervalos revisão

[zimzurelho]

Boas,

Estive a tentar com a vag-com Release3112n alterar os intervalos de revisão de uma ibiza sdi do ano 2000. Faço como fiz no meu 6L, vou ao 17-Instruments, 10-Adaption e depois subo até ao canal 10, 11, 12 para alterar os intervalos em dias e km, mas não me aparece nada, simplemente diz error.
Será que terei de activar os intervalos de revisão noutro lado?
obg

 

[zimzurelho]

Nuinguem me sabe responder???

Será que o 6K2 não mostra os intervalos de revisão no mostrador dos kms. Alguém pode confirmar.
obg

 

[NoOsPhErE]

M8,

Podes fazer aqui um pequeno guia de como fazer isso nos 6L?
Queria mudar para os 10000 no meu e nao sei como fazer
Era mesmo porreiro da tua parte.

Abraçada.

noosphere

 

[crazy_ibz]

Espero ke isto ajude

:arrow: Pôr a zeros:
- Select 17 – Instruments
- Adaptation - 10
- Enter channel 02
- Read
The "Stored Value" is the current value for that channel.
Enter the "New" value of 0 (zero)
- Test
- Save<O></O>
Note: It is normal for the display to show something like "--/--" instead of an actual distance/time to service after resetting until you have driven some distance.

:arrow: Alterar intervalos de revisões:<O</O
- Select > 17 Instruments > Adaptation - 10
- Enter the correct channel from the list below in "Channel Number"
>Channel 05 should be the distance until the next Oil Service.
It is in thousands of kilometers. Let's say you want the Oil
Service light to come on in ffice:smarttags" />8000 km.
Put the value 8 into channel 05. The "standard value" used by the <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com

5000 miles</st1:metricconverter>. That would be <st1:metricconverter w:st=" /><st1:country-region w:st="on"><ST1lace w:st="on">US</ST1lace></st1:country-region>
dealers would be 12 (<st1:metricconverter w:st="on" ProductID="7500 miles">7500 miles</st1:metricconverter>).
>Channel 06 should be the distance until the next In-1 Service.
Same units as above. Standard value would be 24 (<st1:metricconverter w:st="on" ProductID="15,000 miles">15,000 miles</st1:metricconverter>).
>Channel 07 should be the time until the next In-1. In-1 lights
up based on time or distance, whichever comes first. This is in
10's of days. Standard value would be 36 for 360 days.
>Channel 08 would be time until the next In-2. In-2 is based
strictly on time. Standard value is 72 for 720 days (about
two years).
- Read
- The "Stored Value" is the current value for that channel.
- Enter the "New" value of from the list below.
- Test
&shy;- Save<O</O<O</O<O</O

 

[zimzurelho]

Já consegui na ibiza sdi 6k2.

O que fiz foi alterar os parametros 43 e 44. Deixo aqui a informação que recolhi.
- > channel 40 (distance since service)
This value indicates the distance since the last service in 100km.
- > channel 41 (time since service)
The input of the respective desired value is only in steps from days possible, thus effected also the announcement in the display in days.
- > channel 42 (min. distance to oil service)
This value indicates the minimum distance up to the next oil change in 1000km .
15 - Standard
- > channel 43 (max. distance to oil service)
This value indicates the maximum distance up to the next oil change in 1000km .
15 - no Longlife
30 - Petrol engines (Long Life)
50 - Diesel engines (Long Life)
- > channel 44 (max. time to service)
This value indicates the maximum time up to the next service in days.
360 - no Long Life (12 months)
720 - Long Life service (24 months)

No meu 6L altero os parametros 10,11 e 12
- > channel 10 ("OIL" message)
The new adjustment value reads "000150" for inspection all 15.000km, indication effected in 100km (150x100=15.000km).
- > channel 11 ("INSP 01" message)
The new adjustment value reads "00300" for inspection all 30.000km, indication effected in 100km (300x100=30.000km).
- > channel 12 ("INSP 02" message)
The new adjustment value reads "00360" for the annual inspection, indication effected in days (360x1=360 days).